How to install Windows 10? Easy Steps to Fallow
We have found the steps required to install Windows 10 on your computer. Whether you put it on your computer for the first time, upgrade to an older version of Windows, or want to do a clean installation on a computer already running Windows 10 - we have the answers.
1. Make sure your device meets the minimum system requirements
For the latest version of Windows 10, you need the following:
CPU: 1GHz or faster processor (here is a list of supported CPUs)
RAM: 1GB 32-bit for Windows 10 or 2GB for Windows 10 64-bit
Storage: 32GB of space or more
GPU: DirectX 9 compatible or later with WDDM 1.0 Bender
Display: 800x600 resolution or higher
Internet connection: Some versions of Windows 10 require an Internet connection during setup.
2. Create installation media
Microsoft has a tool specifically for creating installation media. You can download the tool under the heading "Create Windows 10 Installation Media" by using this link or by going to this page and selecting "Download Tool Now".
You will need a free USB drive with at least 8GB of space (or a blank DVD) to insert the Windows 10 installation files.
You ask "What to do?" Page.
You can choose whether the language and version of Windows you want is 32-bit or 62-bit, and then select the type of media you want to use. Installing from a USB drive is easy, but you can find details about using DVD and ISO files here. You will then select your USB drive from the list of drives, and the device will download the required files and place them on the USB drive.
(Note: If you are upgrading a Windows 7 or Windows 8.1 PC, you can only use this tool to download and install Windows 10 on your computer.
3. Use the installation media
Insert your installation media into the computer on which you want to install Windows 10, and then access your computer's BIOS or UEFI.
It is a system that allows you to control certain aspects of your computer's hardware and it is built into your motherboard. This step is specific to your specific hardware, so we can not tell you what to do. However, you should find a way to access it by visiting your computer or motherboard manufacturer's website.
Usually accessing the computer's BIOS or UEFI requires a specific key during the boot process, often Escape, F1, F2, F12 or Delete. Therefore, find out which key your computer uses, and then turn it off. Reboot it and hold down the required key as soon as it starts booting.
4. Change the boot order of your computer
In your computer's BIOS or UEFI, you need to find the setting for boot order. It appears in the "Boot" or "Boot Order" section. It determines which devices to use when the computer starts up.
The computer will not boot into the Windows 10 installation tool unless this drive is on, with the computer booting more than the drive containing the current operating system.
You need to move the drive (this could be your USB drive or DVD drive) to the boot order menu.
If your computer is using it, you need to disable Safe Boot.
5. Save the settings and exit the BIOS / UEFI
Your computer should now boot into the Windows 10 installation tool, which will guide you through the process of installing Windows 10 on your computer.